Skip to content
English
  • There are no suggestions because the search field is empty.

How to Add a Signup Form From Another Provider

Put a signup form on your website when the mailing list lives with an outside provider, such as Mailchimp, Constant Contact or HubSpot.

You can put the form itself on one of your pages, or add a button that sends people to the provider's page. This guide uses Mailchimp as the example, and the steps are the same for any provider.

Read this first: every address collected this way goes to Mailchimp and nowhere else. It will not appear in your website's own form reports, and your website sends no email about it. Mailchimp sends its own confirmation instead.

Step-by-Step Instructions

1. Choose Between the Form and a Button

What the visitor sees

The form on your page: Boxes to fill in, on your website

A button that links out: Your website, then Mailchimp's page

Looks like the rest of your site

The form on your page: Yes, once it has been styled

A button that links out: No, it is Mailchimp's page

Setup

The form on your page: Paste a piece of code

A button that links out: Paste a web address behind a button

Best for

The form on your page: A newsletter page that should match your site

A button that links out: Getting a signup published today

Most hotels want the form on the page. Follow steps 2 to 6 for that. If you want the button instead, skip to If You Would Rather Link Straight to Mailchimp, below.

2. Copy the Code From Mailchimp

  1. Open your audience in Mailchimp. This is the list you want people to join.
  2. Go to its signup forms and choose the Embedded form option.
  3. Copy the code it gives you. It is a block of text starting with a < character.
    • ⚠️ Copy it from your own audience, every time. Sample code in help articles has the destination removed, so a form built from it looks normal but collects nothing.

3. Choose the Page It Goes On

  1. Use an existing page if you already have one about your newsletter or your offers.
  2. Or create a new page for it — see How to Create a New Page.
  3. Decide how people reach it. A signup on its own page needs a link that leads to it, usually in the footer. Step 6 covers that.

4. Paste the Code Into a Column

Use the Columns 1.0 widget rather than a plain block of text. A signup form pasted straight onto a page runs the full width of the screen, which is fine on a phone and looks wrong on a desktop monitor. A column lets you set how wide the form is and where it sits, with no styling code to write.

The page is twelve columns wide. Width and Offset both count in those columns: 12 is the full width of the page, so 6 is half of it, 8 is two thirds and 4 is a third. Offset is empty space to the left of a column, measured in the same units. All the widths and offsets in one row add up to 12. Choose your widths first, then use whatever is left as the offset.

  1. Open the page in the Page Editor.
  2. Click Add Widgets in the top bar, then click the target zone where you want the form to sit.
  3. Find Columns 1.0 in the picker and click View Options, then choose the single-column starter, or click New to start empty. See How to Add a Widget to a Page if the picker is new to you.
  4. Open the column for editing and set:
    • Width: how much of the page the form fills on a desktop.
    • Offset: how far it is pushed in from the left.
    • Content Type: leave it on Text.

    These settings work well as a starting point:

    A form on its own

    Width: 8 Col

    Offset: 2 Col

    Why: Two empty columns on each side, so the form is centred and easy to read

    Two columns side by side

    Width: 6 Col each

    Offset: none

    Why: The two halves fill the row

    A form beside an image

    Width: 6 Col form, 4 Col image

    Offset: 2 Col on the form

    Why: The offset, the form and the image come to 12 across

    [diagram: Component-Column-Grid-Widths]

    The same three layouts drawn to scale against the twelve columns. The hatched blocks are offsets: empty space you set, not something the visitor sees.

  5. Click Edit on the Copy field to open the editor.
  6. Click the HTML tab at the bottom left. The editor swaps from the formatted view to the code view.
    • ⚠️ The code has to go into the HTML tab. Pasted into the formatted view, it appears on your page as lines of code instead of a form.
  7. Paste the code into the editor, then save the column.

These settings apply only to desktop and tablet screens. On a phone, every column takes the full width and the columns sit one under the other. That is the right layout for a phone, so there is nothing to set for mobile.

5. Test It With a Real Address

  1. Click Page Preview. The form appears in place, in your page's layout.
  2. Fill it in with your own email address and submit it.
  3. Open your audience in Mailchimp and check that your address is there.
    • ⚠️ If the page simply reloads and nothing arrives, the code you pasted has no destination in it. That happens when the code came from a sample and not from your own audience. Copy the code again from your audience, delete what you pasted, and paste the new version.
  4. Click Publish once the address arrives.

6. Link to It From the Footer

Do this when the form has a page of its own.

  1. Open your footer for editing — see How to Edit Your Header and Footer.
  2. Add a link to the signup page and style it as a button, as described in How to Use the Text Editor.
  3. Click Publish.

If You Would Rather Link Straight to Mailchimp

Mailchimp hosts a signup page for every audience, and linking to it takes only a few minutes.

  1. Copy the address of that hosted page from Mailchimp.
  2. Add a link on your own page or in your footer, and style it as a button.
  3. Set it to open in a new window, so people keep your website open behind it.
  4. Click Publish, then click the button on the live site and sign up with your own address to check it.

This is also the better choice when the form asks for a lot, such as several interests, room preferences or dates. Mailchimp's own page handles long forms well.

Pro-Tips & Troubleshooting

  • It will not match your website straight away. Mailchimp's code is styled for Mailchimp's pages. Ask whoever manages your website to style it once so that it matches your other forms. After that, you can reuse the same code on any page.
  • The form is too wide, or squashed against one side. Both come from the column's Width and Offset, not from the code. Change those two numbers, keep the row adding up to 12, and leave the pasted code alone.
  • Just need it live quickly? A plain text widget works and takes one step fewer. It runs the full width of the page on a desktop, so it suits a short signup on a narrow page better than a long one on a wide layout.
  • This does not use up your website's form allowance. The Forms area of your website has a limit on how many forms you can run. A Mailchimp signup is not one of them, so a hotel already using its allowance for an enquiry form can still add this.
  • "Where do I see who signed up?" In Mailchimp. Your website's own reports cover only the forms you built there. See How to Manage Website Forms for the difference.
  • "Nobody is receiving a notification." Nothing on your website emails you about these signups. Set up whatever alert you want inside Mailchimp.
  • "It worked, then it stopped." If you created a new audience in Mailchimp, the old code still points at the old one. Copy the code from the audience you are using now and replace it.
  • Name Mailchimp in your privacy notice. What visitors type into that form goes straight to Mailchimp, so your privacy wording needs to say so.
  • Any other provider works the same way. If your list lives somewhere else and they give you code to embed, steps 2 to 5 are unchanged.
  • Rather have it done for you? Our support team can set the signup form up on your website, styled to match. This is paid work, so email support@bookassist.com with the provider you use and the page you want it on, and ask for a quote.

→ Next: How to Publish Your Site — taking the new page and footer link live

Related: How to Add a Widget to a Page — using the picker, and what View Options gives you · How to Use the Text Editor — the editor you paste the code into, and how to style a link as a button · How to Create a New Page — the page to put the form on · How to Manage Website Forms — building a form on your website instead, with its own reports and emails